Product ID:SPEEDHIDE LATEX FIRE RETARDANT, 42-7 (092589V)
MSDS Date:06/05/1990
FSC:8010
NIIN:00N062664
MSDS Number: BYVDH

PPG INDUSTRIES INC

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555

Cage: 4D920

PPG INDUSTRIES INC

ALLISON PARK, PA 15101 US

Telephone: 800-245-2590

Cage: 4D920

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

WATER; (DEIONIZED WATER)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 35-40%

OSHA PEL N/K

ACGIH TLV: N/K

FILM FORMERS, RESINS, & ADDITIVES

Fraction By Weight: 55-60%

OSHA PEL N/K

ACGIH TLV: N/K

OF TITANIUM DIOXIDE DUSTS FROM COATINGS IS

RTECS: 9999999ZZ

IS NO SIGNIFICANT HAZARD FOR MAN.

RTECS: 9999999ZZ

EXPOSURE TO CORROSIVE MATERIAL, PERSISTENT

RTECS: 9999999ZZ

EXPOS LIMITS, LEL BELOW STATED LIMIT & TO REMOVE

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST: HARMFUL IF SWALLOWED. EYES:
CAUSES IRRIT. REDNESS, ITCH, BURNING SENSATION & VISUAL DISTURBS
MAY INDICATE EXCESS EYE CNTCT. SKIN: MAY CAUSE MOD IRRIT. MAY BE
ABSORBED THRU SKIN. DRYNESS, ITCH, CRACKING, BURNING, REDNESS &
SWELLING ARE CNDTNS ASSOC W/EXCESS SKIN CONTACT. INHAL: VAP & SPRAY
MAY (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: BE HARMFUL IF INHALED. CHRONIC: AVOID
LONG TERM & RPTD CNTCT. PROD CONTAINS TITANIUM DIOXIDE. ANIMALS
INHALING MASSIVE QTYS OF TITANIUM DIOXIDE DUST IN LONG-TERM STUDY
DEVELOPED LUNG TUMORS. STUDIES W/HUMANS INVOLVED IN MFR OF THIS
PIGMENT INDICATE NO INCR RISK OF CANCER FROM EXPOS. POTNTL FOR
INHAL (ING 4)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: DO NOT INDUCE VOMIT. EYES: FLUSH EYES IMMED W/PLENTY
OF WATER FOR AT LEAST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF WATER
FOLLOWED BY WASHING W/SOAP & WATER. INHAL: REMOVE TO FRESH AIR.
APPLY ART F RESP & OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IF ANY
OF FOLLOWING OCCUR DURING/FOLLOWING USE OF PROD, CNTCT POIS CTL
CTR, EMER ROOM OR MD IMMED. HAVE MSDS INFO AVAIL. INGEST, EXCESSIVE
(ING 6)

Flash Point Method:PMCC
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY CHEM
OR UNIVERSAL AQ FILM FORMING FOAM) DESIGNED TO EXTING CLASS
(SUPDAT)
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILDUP & (SUPDAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO BUILDUP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE OR OTHER AB SORB MATL & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS IIIB COMBUST LIQS. PROTECT FROM FREEZING.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
COATING SYSTEM, READ THE MSDS(S) FOR THE OTHER COMPONENT(S) BEFORE
BLENDING AS THE RESULTING MIXTURE MAY HAVE THE HAZARDS OF ALL OF
ITS PARTS.

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE A SUITALBE
NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION OR LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF LISTED INGREDS BELOW LOWEST SUGGESTED (ING 7)
Protective Gloves:NITRILE, NEOPRENE OR LATEX.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH & DELUGE
SHOWER . WEAR PROTECTIVE CLOTHING INCLUDING IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA: IIIB COMBUST LIQ FIRES. FIRE FIGHT PROC: POSS
AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF WATER IS USED, FOG
NOZZS ARE PREF. HAZ DECOMP PRODS: FUMES INCLUDING: CARBON MONOXIDE,
HYDROG EN CHLORIDE, CHLORINATED PRODUCTS, CHLORINE.

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:17.3
Vapor Density:HVR/AIR
Spec Gravity:1.30
Evaporation Rate & Reference:34 (BUOAC=100)
Solubility in Water:38.4%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACTERISTIC OF CHEMICAL
FAMILY & ANY LISTED SOLVENTS.
Percent Volatiles by Volume:74.90

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING OR FLAME-CUTTING ON SURFS COATED W/PROD
MAY PRDCE (SUPDAT)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
APPROVED WASTE MANAGEMEN T FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.